Artificial Turf NY
Pool Deck Turf Installation
A durable, low-maintenance alternative to bare concrete and pavers around your pool.
A concrete pool deck can crack, stain and get uncomfortably hot in direct sun over time. Natural grass around a pool tends to struggle too, since chlorine splash-back and constant foot traffic make it hard to keep a healthy lawn near the water. Pool deck turf offers an alternative: a consistent, low-maintenance surface that holds up to regular pool use without mowing, reseeding or the upkeep that comes with grass.
Artificial Turf NY installs pool deck and pool-surround turf throughout Nassau County, Suffolk County, Brooklyn, Queens, and Westchester County.
Why Consider Turf Around a Pool
Pool areas see a different kind of wear than a typical lawn or patio constant moisture, bare feet, sunscreen and repeated foot traffic in a concentrated space. Turf built for this kind of use is intended to offer:
- A more consistent, textured surface underfoot compared to bare concrete
- A base and backing system designed to help move surface water off the area
- No mowing, reseeding or dead patches from chlorine exposure
- A uniform, green appearance that doesn't depend on weather or season
- Less day-to-day upkeep than maintaining grass in a high-splash area
Every yard and pool layout is different and actual performance depends on the base preparation, slope and drainage conditions specific to your site. Our project manager evaluates all of this in person before recommending a product or approach. If you’re comparing turf to other surface options, our Artificial Turf vs. Natural Grass page covers how each surface generally performs over time.
Drainage Considerations for Pool Areas
Drainage is one of the most important parts of planning a pool deck turf installation and also one of the most site-specific. Our approach typically includes a compacted aggregate base, a permeable underlayment and a turf backing designed to allow water to pass through rather than pool on the surface. That said, drainage performance depends heavily on the existing grade, slope and soil conditions at your property and on how the area connects to your home’s overall drainage. In some cases flat sites, poor existing grade or areas with limited runoff options additional grading, drains or engineering may be required to get the results you’re looking for. Our project manager will walk you through what’s realistic for your specific site during the on-site evaluation. For more on how these systems work, see our Artificial Turf Infill, Base and Drainage Systems and Artificial Turf Drainage and Rain Guide pages.
Installing Turf Over an Existing Concrete Pool Deck
Many pool decks are already poured concrete and turf can often be installed directly over a sound concrete surface using a system designed for that purpose typically a drainage-oriented underlayment or pad beneath the turf to help manage water flow, since concrete itself doesn’t drain the way soil does. The condition of the existing concrete matters: cracks, poor pitch or drainage issues in the slab itself need to be addressed as part of the project, not just covered over. Our project manager assesses the existing surface during the site visit and recommends the right approach. Related considerations for these projects are covered on our Artificial Turf Installation on Concrete page.
Working Around Pool Coping and Pavers
Most pool areas involve some combination of coping stones, paver borders or transition edges between hardscape and the surrounding yard. These transitions require careful cutting, edging and seaming so the turf follows the pool’s shape cleanly and doesn’t create a tripping hazard or an uneven edge along the coping line. Where pavers are part of the design, turf can be installed around or between them depending on the layout, with edge restraints used to keep seams secure over time. Site-specific details like this are reviewed during your in-person consultation, since every pool shape and hardscape layout is different.
Residential and Commercial Pool Applications
We install pool deck turf for residential backyard pools as well as commercial and shared-amenity settings, including community pools, HOA and multifamily properties, hotels and clubs. Commercial pool areas often involve additional factors higher foot traffic, ADA and accessibility considerations and coordination with property managers or maintenance staff that are scoped separately from residential projects. If your project is part of a larger commercial property, our Commercial Artificial Turf Installation and Artificial Turf for HOAs and Multifamily Properties pages go into more detail on how those projects are handled.
Related Pool Area Applications
If your pool sits on a rooftop, terrace or balcony rather than at ground level, our Rooftop, Balcony and Patio Turf page covers the additional planning that goes into elevated installations. If the pool area also functions as a play space or gets regular use from pets, our Playground Turf Installation and Pet Turf and Dog Runs pages cover those use cases specifically.
Our Installation Process
Every project starts with a call from a project manager to discuss the space, followed by an in-person site visit to measure the area, evaluate drainage and access and recommend a turf and base system suited to the site. From there, the typical process includes removal of the existing surface (or preparation of existing concrete), excavation and grading where needed, base compaction, drainage work, turf placement, seaming, edging and infill, finishing with a walkthrough of the completed project. A full breakdown of these steps is available on our Our Installation Process page. Project timelines vary based on the size of the area, existing site conditions and current scheduling your project manager will confirm an estimated timeline for your specific project during the consultation.
Maintenance Around the Pool
Turf around a pool generally requires less routine maintenance than grass or exposed hardscaping, since there’s no mowing or reseeding involved. Ongoing care typically includes occasional brushing to keep fibers upright and periodic infill top-offs to help maintain drainage performance over time. Our Artificial Turf Cleaning and Maintenance Guide and Artificial Turf Maintenance and Infill Replacement pages cover the full recommended care routine.
What Affects the Cost of a Pool Deck Turf Project
We don’t publish flat pricing, since every pool deck is different and an accurate quote depends on measurements and conditions specific to your property. Factors that typically influence project cost include:
- The size of the area being covered
- Whether existing concrete, pavers or grass needs to be removed
- Base depth and the amount of excavation required
- The complexity of the drainage plan for the site
- The amount of cutting, edging and seaming needed around pool coping
- Site access, staging space and disposal of removed material
- Whether the project involves any permitting or engineering review
For general background on how these factors typically play into project pricing across turf projects, see our Artificial Turf Cost Long Island and How to Get an Accurate Artificial Turf Quote pages or use our Artificial Turf Cost Calculator to get a rough starting estimate.
Service Areas
We install pool deck turf throughout Nassau County, Suffolk County, Brooklyn, Queens and Westchester County. Visit our Service Area page for a full list of towns and neighborhoods we currently serve.
Frequently Asked Questions
Is turf around a pool slippery when wet?
Turf products used around pools are generally selected for their texture and drainage properties, which are intended to perform better underfoot than smooth, wet concrete. Actual traction can vary by product and site conditions, and your project manager can point you to the specific options recommended for pool areas.
Does chlorine damage artificial turf?
Turf products designed for pool areas are generally built to hold up to routine chlorine exposure from normal splash-back better than natural grass, which tends to die off in these conditions. As with any outdoor surface, prolonged or heavy chemical exposure can affect materials over time, and your project manager can speak to specific product warranties.
Does turf get hot around the pool in summer sun?
Like most synthetic materials, turf can get warm in direct summer sun, and how noticeable that is depends on the product, color, and amount of direct sun exposure. Our Artificial Turf Heat in Summer and Cooling Options page covers products and options that can help manage this.
How long does a pool deck turf installation take?
Timelines vary based on the size of the area, existing surface conditions, and drainage work involved. Your project manager will provide a specific estimated timeline after the on-site evaluation.
How much does pool deck turf cost?
Cost depends on the size of the area, existing surface conditions, drainage requirements, and site access, so we don’t publish flat pricing. Contact us to schedule a site visit and receive a project-specific quote.
Can turf be installed directly over my existing pool deck?
In many cases, yes, provided the existing surface is structurally sound and the drainage plan is addressed as part of the project. Our project manager will assess your specific pool deck during the site visit and recommend the right approach.
Get a Project Quote
Every pool deck is different pool shape, existing surface, access and drainage all affect the right approach. Contact us to schedule a site visit with a project manager and get a quote specific to your property.